Cabot's Garden Furniture Oil

It doesn’t take long for outdoor timber furniture to lose its lustre. Cabot’s Garden Furniture Oil is here to help! The highly durable, low odour oil is designed to provide protection to all exterior surfaces and lasts twice as long as traditional garden outdoor furniture oil.

View more
  • Dirt & Mould Resistant
  • Water Repellent
  • Water Wash Up
  • Fast Recoat 2 Hours
  • UV Protection
outdoor furniture oil

Range

Semi-transparent, natural look that enhances the timber grain with matt finish. To view our range, view the colour visualiser.

Jarrah
Jarrah
Merbau
Merbau
New Natural
New Natural

All colours displayed on this page show 2 coats on merbau timber.
Colour varies depending on your timber type. Click on Colour Visualiser button below to view the full range of colours.

View colour visualiser

Available sizes

1 LITRE
2 LITRE
  • Areas
    Exterior timber, Timber garden furniture
  • Clean Up
    Water
  • Sizes
    1L, 2L
  • Coverage
    12 M2/L
  • Recoat Time
    2 Hours
  • Safety Data Sheet
    Download document
  • Product Data Sheet
    Download document
Surface Preparation
Note fill holes and imperfections with a suitable timber putty.

Bare timber
To coat new bare timber immediately, scrub damp timber with Cabot’s New Timber Prep, following label instructions.

New Timber Prep will draw out tannins and oils quickly from the surface, allowing you to skip the 4-6 weeks weathering process required for new timber.
Always follow New Timber Prep with Cabot’s Deck Clean following label instructions.

Previously painted or varnished timber
Remove back to bare timber using a paint stripper, or sanding.

For exterior surfaces clean with Cabot’s Deck Clean following label instructions
Previously stained or oiled timber
For exterior surfaces clean with Cabot’s Deck Clean following label instructions, then allow timber to fully dry. Test if the surface is ready for coating by sprinkling water on the timber. If the water beads on the surface, repeat the application of Cabot’s Deck Clean. If water is absorbed into timber, it is ready for coating. For a more transparent look, sand timber back to bare before coating.
Weathered and grey timber
For best results, sand timber back to fresh substrate. Clean with Cabot’s Deck Clean following label instructions.
Apply With Brush
Application
  1. Stir thoroughly with a broad flat paddle before and during use.
  2. Using a brush, apply liberally along the length of the timber including exposed edges and end grain.
  3. Apply two coats allowing 2 hours between coats.

Note: The initial milky colour helps with even product application, drying to a semi-transparent finish.
Suggested Frequency Every 12 months check your coated timber for changes in colour or water repellency diminishes due to weathering. When required,
Instructions
  1. Clean the surfaces with Deck Clean as per label instructions.
  2. Recoat with 2 coats of Garden Furniture Oil.

Use Cabot’s Clean & Care Exterior Wipes to refresh exterior timber furniture and help remove dirt, dust and bird droppings.

How to Recoat Your Outdoor Furniture

How To Protect Your Outdoor Timber Bench | Cabot's Garden Furniture Oil

You may also need

Cabot's Deck Clean Cabot's Deck Clean

Get the job done right first time, with Cabot's Deck Clean. This essential preparation product cleans and rejuvenates new and old exterior timber surfaces prior to an application of a top coat of oil, stain, paint or exterior varnish. Designed to revitalise and clean grey, weathered and soiled timber, it also removes naturally occurring tannins from new timber while eliminating mould and other contaminants.
Cabot's Clean & Care Wipes Cabot's Clean & Care Wipes

Bring your deck to life – with one quick wipe! Cabot’s Clean & Care Wipes have been specifically formulated to clean and nourish at the same time, meaning you can refresh and renew your timber decking with one handy wipe! Each resealable pack comes with 15 thick and strong wipes, dual-sided with cleaning nodules to remove even the toughest dirt and grime on timber with ease.

Product Calculator

If you are unsure on how much product you need, please use our product calculator. Please note minimum length/width value is 1 metre and maximum is 50 metres.

1metre
1metre
2coats
Calculate
0 Total SQM
  • 0 SQM
  • 0 Litre

This website uses cookies to provide you with a better user experience. If you agree to our use of cookies, please accept this message and continue to use this site.