Cabot's Exterior Clear

Cabot's Exterior Clear is a highly durable, polyurethane that provides protection without hiding the grain for exterior doors, windows and trim. It is designed to provide resistance against weathering and moisture damage and contains ultra-violet absorber technology to maximise gloss, performance and durability. It's specially formulated resin system ensures high gloss retention and superior clarity to enhance the richness and natural texture of the timber.
  • Water Repellent
  • Turps Wash Up
  • UV Protection
  • Areas
    Exterior timber including doors, Trim. Not suitable for walk on areas, windows
  • Clean Up
    Turps
  • Sizes
    500ML, 1L, 2L
  • Sheen
    Satin, Gloss
  • Coverage
    12 M2/L
  • Recoat Time
    12 Hours
  • Safety Data Sheet
Preparation

Note: Fill holes and imperfections with a suitable timber putty.

New Bare Timber

To coat new bare timber immediately, scrub damp timber with Cabot’s New Timber Prep, following label instructions. New Timber Prep will draw out tannins and oils quickly from the surface, allowing you to skip the 4-6 weeks weathering process required for new timber. Always follow New Timber Prep with Cabot’s Deck Clean following label instructions. Remove excess water from the surface with squeegee on Cabot’s Deck Prep brush, and allow timber to dry for at least 1 hour. Note: Cooler conditions could slow down the drying time of the timber.

Previously Painted or Varnished Timber

Remove back to bare timber using a paint stripper, or sanding. For exterior surfaces clean with Cabot's Deck Clean following label instructions.

Previously Stained and Oiled Timber

For exterior surfaces clean with Cabot’s Deck Clean following label instructions. Test if the surface is ready for coating by sprinkling water on the timber. If the water beads on the surface, repeat the application of Cabot's Deck Clean. If water is absorbed into timber, it is ready for coating. For a more transparent look, sand timber back to bare before coating.

Weathered and Grey Timber

For best results, sand timber back to fresh substrate. Clean with Cabot's Deck Clean following label instructions.

Apply with Brush, Spray
Application

1. Stir thoroughly with a broad flat paddle before and during use.

2. Always brush in the direction of the grain. Apply

3 liberal coats, allowing 12 hours between coats. 3. Sand lightly between coats.

Regular inspection of all coated surfaces is recommended. Pay particular attention to sharp edges.

1. Clean the surface with Cabot's Deck Clean.

2. Apply Cabot's Exterior Clear following label instructions.

Sheen

Satin
Gloss

Available sizes

500 ML
1 LITRE
2 LITRE

Product Calculator

If you are unsure on how much product you need, please use our product calculator. Please note minimum length/width value is 1 metre and maximum is 50 metres.

1metre
1metre
2coats
Calculate
0 Total SQM
  • 0 SQM
  • 0 Litre