Ensure the surface is thoroughly cleaned
with Cabot’s Floor Clean prior to application of Cabot’s Laminate Floor Restore (following label directions). Cabot’s Floor Clean will remove dirt and dust to allow Laminate Floor Restore to properly adhere to the surface. Allow the surface to dry fully before applying Cabot’s Laminate Floor Restore.
Important: Do NOT shake before use to
minimise bubbles forming.
1. Apply 1 coat of Cabot’s Laminate Floor Restore with a sponge mop or Cabot’s Deck Coat lambswool applicator. Do not allow pools of liquid to form on the surface.
2. If required, apply 1 further coat following the same application method as above. Additional coats will increase gloss level and durability.
3. Allow the product to dry for a minimum of four hours before walking on the surface.
Clean laminate floors regularly with Cabot's Floor Clean to remove dirt, dust and grime. When the surface looks worn, and has lost its lustre, rejuvenate with Cabot's Laminate Floor Restore as a maintenance coat.
If you are unsure on how much product you need, please use our product calculator. Please note minimum length/width value is 1 metre and maximum is 50 metres.