How to Transform Your Interior Timber Floors with Stain & Varnish Water Based

What to use: Cabot’s Stain & Varnish Water Based & Cabot's CFP Floor Water Based

Why you should use it: Fast drying, low odour, hard wearing finish for interior timber floors.

How it works: Highly durable, scratch resistant flooring system to transform your timber floors.

Get Started

Note: Fill nail holes, cracks and other defects with Cabot’s Wood Tone Putty after applying the first coat of this product for accurate colour matching. Remove stains, dirt, wax, grease and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.

Bare Timber
Sand the surface smooth using 180 - 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.

Previously Coated Timber
Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.

1. Apply 1 coat of Cabot's CFP Floor Water Based as a sealer.
2. Apply 1 - 2 coats of Cabot's Stain & Varnish Water Based in your chosen colour with a 6 - 10mm nap micro-fibre roller.
3. Finish with 2 coats of Cabot’s CFP Floor Water Based following application instructions above.

Give your floor time to dry for 16 hours before walking on the newly-coated surface. Replace furniture after 72 hours. 

It’s time to pop those socks on and make like Tom Cruise in Risky Business! Go on – you’ve earned it!